A flooring guide and connection service. This site is not a flooring contractor and installs nothing.

Winton Flooring The Sample Board: every floor, sectioned and labelled

Board 04 ยท Mineral

Tile & stone: the longest-lived floor, and the least forgiving to install.

A well-set tile floor outlives the house's other finishes several times over. A badly set one cracks within a year, and the crack is almost never the tile's fault: it is the assembly underneath, flexing, shrinking, or moving without a joint to absorb it. Tile is bought as a system or it is bought twice.

Cross-section of a tile floor assemblyTile and grout over thinset, an uncoupling membrane, backer or prepared slab, showing why deflection and movement joints decide whether tile cracks. Tile + groutThinsetUncoupling membraneSubfloor / slab Ceramic tile needs joist deflection no worse than L/360; natural stone needs L/720. A soft movement joint at the perimeter and at plan changes is not optional.
Plate 3 โ€” Tile is a system, not a surface. Cracks telegraph what the layers underneath did.

Choosing the tile itself

  • Porcelain vs ceramic: porcelain is fired denser, with water absorption of 0.5% or less, which is what makes it frost-safe and the default for floors. Ceramic is softer, cheaper, and fine on dry interior floors.
  • PEI rating grades glaze wear: PEI 3 covers most home floors; PEI 4โ€“5 for heavy traffic and commercial entrances.
  • Slip: look for a DCOF of 0.42 or higher for level interior floors expected to be walked on wet; polished anything is a skating rink in a bathroom.
  • Large format (any edge 15 in. or longer) demands flatter floors, more thinset skill, and offset patterns limited to 33% to control lippage. The bigger the tile, the more the subfloor bill grows. Budget for it.
  • Natural stone (marble, travertine, slate, granite) is quarried, variable, and porous: it needs sealing, gentler cleaners, and the stiffer L/720 deflection standard. Marble in a shower is beautiful and a maintenance commitment; say both halves of that sentence before buying it.

The assembly, where tile is won or lost

Over wood subfloors, tile needs a proper underlayment: cement backer board set in thinset and screwed to schedule, or an uncoupling membrane that lets the tile layer move independently of the wood's seasonal movement. Joist deflection must be no worse than L/360 for ceramic and L/720 for stone, which rules out some older, bouncy floors until they are stiffened. Movement joints at the perimeter, at changes of plane, and across large fields are specified in the TCNA handbook because tile and grout have almost no give; a floor tiled wall-to-wall with no soft joint will eventually tent or crack along the stress line.

Grout is not waterproofing. In showers and wet rooms, the waterproofing is a membrane behind or under the tile; grout and stone need periodic sealing, and a shower built on grout alone is a slow leak with good PR. Radiant heat under tile, by contrast, is the best pairing in flooring: tile stores and releases heat evenly, and electric mat systems are a modest add-on during a tile job and a major one after it.

Price tile in the estimator The subfloor chapter